September 11, 2018 - The New PosiTector BHI Barcol Hardness Impressor Conforms to ASTM B648/D2583, DIN EN 59 and AS/NZS 3572.22. This unit measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic.

Features

Easy-to-read digital display

Comparable to 934-1 Barcol Hardness Tester

Lightweight, portable device can be used in any orientation

PosiTector interchangeable platform - attach any PosiTector probe to a single gage body

USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software

User-adjustable measurement time with onscreen countdown

Includes spare, field replaceable indentor with replacement tool

Reset feature instantly restores factory settings

Item Nos. HA-656200, HA-656210, HA-656220

Durable – Accurate – Versatile

The BHI Tester is solvent, acid, oil, water and dust resistant; basically weatherproof. Shock-absorbing, protective rubber holster with belt clip and hard-shell carrying case included. Two year warranty on gage body and probe. A Long Form Certificate of Calibration is included. Hi-Res mode increases displayed resolution for use on applications that require a greater precision. The PosiTector body accepts all PosiTector BHI, SHD, 6000, 200, DPM, IRT, RTR, SPG, SST, and UTG probes – easily converting from a hardness tester to a coating thickness gage, dew point meter, infrared thermometer, surface profile gage, soluble salt tester, or ultrasonic wall thickness gage.

Gardco / Paul N. Gardner Company Inc.
Pompano Beach, Florida
954/946-9454

September 10, 2018 - New hand weld shaver uses standard carbide inserts in a milling cutter to shave weld beads flush to a work piece. Used for cleaning butt welds and corner welds. The weld shaver will remove only the weld and not damage surrounding materials such as conventional grinding of joints. The two horsepower model WS-625 will quickly remove welds at 6-8- feet per minute.

Heck Industries
Hartland, Michigan
810/632-5400

August 30, 2018 -  Olympus’ new L Series Vanta™ handheld X-ray fluorescence (XRF) analyzer is designed for customers who demand the ruggedness, power, speed and ease of use that Vanta analyzers provide in a cost-effective Si-PIN X-ray detector model. Joining our family of M Series and C Series analyzers, the L Series delivers a fast return on investment in applications including positive material identification (PMI), quality assurance (QA), metal fabrication, scrap metal and car catalyst recycling, precious metal analysis and environmental inspections.

Vanta L Series analyzers deliver all of the features and benefits that have made Vanta analyzers so popular. L Series analyzers can be calibrated for alloy, precious metal and geochem applications and are built for maximum uptime and reliability. Rugged features include:

• IP65 rated for protection against dust and water

• Drop tested (MIL-STD 810 G)

• Built to withstand a temperature range of -10 °C to 50 °C (14 °F to 122 °F)*

In addition to being so rugged, L Series analyzers offer advanced technology and connectivity features. The analyzers incorporate Olympus’ Axon™ technology, a breakthrough in XRF signal processing for stable results in any environment, and user-friendly features including:

• Optional Wi-Fi and cloud connectivity for fast decision making and easily accessible results

• Fleet management tools and a customizable user interface to help minimize operator training

• Intuitive interface and responsive touch screen, enabling users to spend more time interpreting results than operating the analyzer

Olympus’ L Series Vanta analyzers deliver the durability, power and ease of use Vanta analyzers are known for, in a cost-effective model.

Olympus America
Webster, Texas
800/225-8330

September 5, 2018 - Milwaukee Tool enhances comfort and safety on the jobsite with the introduction of Winter Insulated Gloves. Designed to provide ultimate warmth and all-day comfort, the new gloves are EN 511-rated* for warmth in cold environments and thoughtfully developed with proprietary knitting that provides the protection necessary at ANSI/ISEA-rated Cut Levels 1 and 3.

The gloves utilize a warm, acrylic terry liner that helps users keep their hands warm in the coldest conditions. A secure dual liner keeps users’ hands warm and is designed to ensure that it does not separate from the gloves after extensive use on the jobsite.

The Cut Level 1 Winter Insulated Gloves are ideal for material handling and general-purpose remodeling applications. These gloves are constructed with 15-gauge nylon outer liner for overall breathability and high dexterity in the fingertips, and a 10-gauge inner liner. They also feature a 1/2 double-dipped latex micro finish for improved water resistance and warmth.

The Cut Level 3 Winter Insulated Gloves are ideal for demolition, wire-stripping, and pipe-threading application, and feature ANSI/ISEA cut level 3 protection to help prevent injuries from sharp objects on the jobsite. These gloves are constructed with high-dexterity 15-gauge nylon and a high-performance polyethylene outer liner for superior protection. A 3/4 double-dipped latex micro finish improves water resistance, warmth, and overall dexterity.

Milwaukee Tool’s new Winter Insulated Gloves are designed to provide users with EN 511 and ANSI-rated protection, all-day comfort, ultimate durability and the best dexterity for handling small objects – without sacrificing jobsite productivity.

*The EN 511 test method measures gloves’ protection from cold in two ways: (1) How the gloves’ material leads cold, and (2) The material’s insulating capacity.

**The new ANSI/ISEA 105 scale and test method provides new cut resistance classification levels.

***Cut testing not necessary for high performance gloves. See TDM Cut Test for EN results.

Milwaukee Tool
Brookfield, Wisconsin

ESAB has announced that it has named off-road and vehicle fabrication expert Ian Johnson an official spokesperson for its welding and cutting products

August 22, 2018 - The new SMART Non-Contact Safety Sensor SRF from Altech Corp. protects machine operators from potential injury by monitoring moveable separating protective devices (such as doors, gates, panels, and hoods) and shutting down or preventing startup of a machine when a device is not properly closed. The SRF sensor additionally is the only safety sensor currently on the market integrating an intelligent diagnostic system, which collects data for early detection of machine faults and allows for timely maintenance fixes. Sensors are available with diagnostics function that can be monitored with I/O Link supporting Industry 4.0 implementation and Smart Factory operations.

SRF (Safety RFID) sensors are compact (36.5 by 26.2 by 15 mm) and will ideally suit any application where safety switches (Type 2) or sensors (Type 4) would be used, including machines for packaging, turning and milling, food processing, woodworking, and injection molding, among many others.

Data for up to 20 different switch conditions can be monitored for each individual sensor, even when they are connected in a series for monitoring multiple access points. Critical data is stored in the sensor with a time stamp and can be reviewed even in the event of a power failure. The collected data can be viewed on a computer via I/O link or displayed on smartphones via NFC technology. Two levels of diagnostics (basic PNP and extended Daisy Chain Diagnostics) are available.

Up to 32 SRF sensors can be safely connected in series using standard four-wire unshielded cables with M12 connectors, which promotes plug-and-play installation convenience. A single cable linking sensor to sensor eliminates unwieldy wire bundles and typical accessory costs.

The sensors are offered with three different coding levels. Low level coded sensors are activated with any SRF actuator. High level coded sensors are paired with one specific actuator. Unique level coded sensors can only be paired once. After pairing, the sensor cannot be activated with any other actuator.

The SRF sensors also offer "Fault Tolerant Outputs,” which prevents unnecessary machine shutdowns. If both OSSD safety outputs are lost, caused by an unsafe condition (such as a door being opened), the machine will immediately shut down. However, if only one output is lost (caused by a fault in the sensor or wiring), the sensor will indicate the condition with a flashing code and transmit the information via the DCD system (if used). After 20 minutes the machine will be shut down.

SRF sensors possess the highest safety ratings (PLe, Cat. 4 according to EN ISO 13849-1 and SIL CL3 according to DIN EN 62061) and are in compliance with ISO 14119. The system’s transmitter, receiver, connectors, and wiring are IP69-rated to withstand harsh processes, including wash-downs.

Unlike traditional keyed switch or reed switch technologies, SRF sensors are especially rugged and immune to vibration, Solid-state components perform wear-free during the system’s expected service life rating up to 20 years. Custom versions can be developed to meet specific application requirements or demands.

Altech Corp.
Flemington, New Jersey
908/806-9400

August 21, 2018 -  Cleco, a registered trademark of Apex Brands, Inc., introduces its new line of pneumatic Right Angle Grinders, featuring a powerful 1.7 hp motor for increased power and  productivity, backed with Cleco’s unsurpassed features, quality and durability, at the most competitive prices  available.

Cleco’s Right Angle Grinders at a glance:

• High-performance 1.7 hp motor delivers maximum power
• Designed to fit all Type 27, Type 27 threaded hub and Type 1 abrasive discs
• Quieter operation with rear exhaust overhose standard
• Ergonomic, anti-vibration handle for increased comfort and less operator fatigue
• Spindle lock for quick and easy abrasive changes
• Dual-layer, high-impact composite housing for extreme durability
• Versatile 270˚ adjustable guard for easy access to tight spaces

Cleco’s Right Angle Grinders are designed for rigorous use and long life, containing the features and power that are perfect for the most demanding applications found in foundries, shipyards, machine shops and rail car manufacturing.

“Our industry is centered around making tools that increase productivity and workflow,” said Dave Bigg, Global Product Manager, Cleco Production Tools. “Cleco’s new Right Angle Grinders have the power you need and the features want, at an exceptional value.”

Cleco Production Tools 
Lexington, South Carolina
800/845-5629

August 21, 2018 -  Saint-Gobain Abrasives has introduced its new Norton QUANTUM3™ RightCut Wheels, adding cut-off capability to its Norton QUANTUM3™ (NQ3) line which also includes Depressed Center Grinding Wheels and Combination Wheels. FABTECH 2018 attendees can see the entire Norton NQ3 Grinding Wheels Line at Booth #C11110 at Georgia World Congress Center, Atlanta, November 6 - 8.

In comparison tests, NQ3 RightCut Wheels have several key benefits over competitive wheels. True to the Norton Quantum3 technology, and its previously released NQ3 wheels, the new Norton Quantum3 RightCut wheels are designed with the operator in mind. It boasts a more rounded grain than precision-shaped ceramic grains found in the market today. Being rounded allows for faster cutting action, with less vibration, which is instrumental in reducing operator fatigue when cutting metal all day.

When working on thinner materials, or in the case where operators need to get the job done quickly, the 0.045"NQ3 RightCut wheel is ideal. Due to the proprietary grain, the wheel easily cuts through the workpiece quickly, increasing efficiency and saving time. 

"The bond system of the NQ3 technology allows for better mix control during the manufacturing process. This better mix keeps the individual grains from clumping together, for a more even wear of the cut-off wheel," said Alicia Castagna Ph.D., Norton |Saint-Gobain Abrasives, Product Manager Thin Wheels. This  is also true with the 1/16 in. NQ3 RighCut wheels when cutting thicker materials. Longer life translates to more productivity, keeping the operator working smarter, not harder.

The Norton Quantum3 line of RightCut wheels are offered in four Type 01/41 and three Type 27/42 cutting application SKU’s. All products are currently in stock. These wheels are available in 4-1/2 in., 5 in. and 6 in. are made in the USA.

Norton | Saint-Gobain
Worcester, Massachusetts
254/918-2313

August 20, 2018 - Houghton International has developed an advanced cleaner designed to replace solvents in precision cleaning applications. Houghto-Rinse RTD™ is a water-based, non-flammable, ready-to-use cleaner that delivers outstanding process performance and surface appearance in a wide range of surface finishing applications. 

Houghto-Rinse RTD is a direct replacement for highly volatile solvents in applications where flammability, health, safety and environmental factors are concerns. It is designed to remove surface residues such as spray paint, marker pen, ink, glue, grease and production soil prior to final inspection, assembly or packaging. It is safe for use on all surfaces including aluminum, steel, magnesium, plastics, painted surfaces, and fiberglass. Its cleaning effectiveness and non-residue properties make it particularly valuable for critical cleaning applications where surface appearance is important. 

“Extensive field testing has demonstrated that Houghto-Rinse RTD delivers outstanding cleaning performance on a broad range of applications,” said Tony Pavesich, Houghton Surface Finishing Industry Leader. “It dries quickly, leaves no residue, and is ready-to-use, so it improves product quality and process efficiency.” The product is also economical, low-odor, and contains rust prevention properties, which may be important when used to clean steel components in critical applications.

Houghton International
Valley Forge, Pennsylvania
800-666-4684