Displaying items by tag: FlexHone

Cubic Boron Nitride abrasive, part of the Flex-Hone line, combines the highest hardness with excellent toughness to provide the optimum surface finish in materials like Monel, Inconel, Incoloy, Hasteloy, Invar and Rene. Flex-Honing is a low pressure, low temperature abrasive finishing process making it an ideal solution in these difficult to finish materials. The tool reduces the work-hardened layer produced by machining operations without imparting thermally induced distortion. The resulting surface is less prone to oxidation and stress induced cracking. Sizes from 4mm to 20mm are standard in three different mesh sizes.

Brush Research Manufacturing Co. Inc.
Los Angeles
323/261-2193
www.brushresearch.com

Brush Research has introduced a new abrasive for the Flex Hone line. Cubic Boron Nitride combines high hardness with excellent toughness to provide the optimum surface finish in materials like Monel, Inconel, Incoloy, Hasteloy, Invar and Rene. The tool reduces the work hardened layer produced by machining operations without imparting thermally induced distortion. The resulting surface is less prone to oxidation and stress-induced cracking.

Brush Research Mfg. Co. Inc.
Los Angeles
323/261-2193
www.brushresearch.com

The resilient Flex-Hone tool features a soft cutting action that provides a surface finish with a non-directional or crosshatched pattern. Fine honing in 400, 600, and 800 grit are available, as is a diamond abrasive that can finish and produce the proper edge radius on harder materials such carbide, ceramic and aerospace steel alloys.

Brush Research Mfg. Co. Inc.
Los Angeles
phone: 323/261-2193
www.brushresearch.com